Timpano TPT3000EQ 1 Ohm 3600W Amp + 4x PRV 10W650A-4 Midbass 10" Speakers 4 Ohm

Description

Includes
:
4x 10W650A-4 10" Woofer Loudspeaker
1x Timpano TPT3000-1 Ohm Amplifier
10W650A-4 10" ALTO Series Woofer
PRV Audio's Alto Series 10W650A-4 is an impressive driver, without a high-end price. This 8 ohm 10" is a great woofer for any high output system such as pro audio or even high SPL automotive systems, this driver is capable of extremely high output.
To get the right sound, a special composite cone is built with non-pressed paper (visible on the backside) for the reduced break-up and smooth sound.
A unique, woven-cloth dust cap helps to achieve high sensitivity by reducing moving mass while helping to cool the voice coil.
Vented pole piece keeps the 2.5" VC cool for continuous high power handling
Cloth double roll surround and the large raised spider can take the high demands of pro sound
65 to 5,000 Hz frequency response makes this mid/woofer suitable for two or three-way designs
Capable of extreme output levels with 97 dB sensitivity and 325-watt power handling
Specifications
Nominal Impedance: 4Ω
Rated Power Handling: 325 Watts
Program Power: 650 Watts
Sensitivity (1W/1m): 97 dB
Resonance Frequency (Fs): 72.31 Hz
Frequency Range at -10 dB: 75 - 5,500 Hz
Recommended Hi Pass X-Over: 150 Hz (12 dB/Octave)
Xmax: 1.5 mm
Voice Coil Diameter: 2.5"
Magnet Material: Ferrite
Frame Material: Stamped Steel
Weight: 10.49 Lbs
Mounting Depth: 4.33” (110 mm)
TPT-3000EQ 1 Ohm
Description
Small Footprint Technology!
Timpano amplifiers raise power amplification to a new standard of quality and usability. The new line delivers the most innovative and powerful Brazilian technology in compact full-range amplifiers on the market. Loaded with features, it provides an unsurpassed efficiency rate of 85-95% in a compact Class D full range amplifier.
Number of Channels: 1
RMS Power at 1 Ohm 12.6V: 3000W RMS
RMS Power at 2 Ohm 12.6V: 2100W RMS
RMS Power at 4 Ohm 12.6V: 1150W RMS
Supply Voltage: 9.5 ~ 15Vdc
Frequency Response: 10Hz ~ 25KHz
Crossover Low Pass: 50Hz ~ 25KHz
Crossover High Pass: 10Hz ~ 700Hz
Signal to Noise: > 90 dB
Harmonic Distortion: < 0.9 % THD
Input Sensitivity: 0.2V
Input Impedance: 12K OHMS
Impedance Output: 1 OHM
Consumption with Signal Musical: 2A ~ 140A
Consumption with Signal Bass: 2A ~ 280A
Dimensions (L x W x H): 8.75” x 7.40” x 3”
Weight: 5.30 Lbs
Features:
The TPT-3000EQ offer 1 channel with advanced individual equalization features for Bass, Mid Bass and Mid High, plus the traditional Level, High Pass and Low Pass features. Its Full Range frequency response from 10Hz to 25KHz allows the installation of Subwoofers, Woofers, Drivers and Tweeters.