Car Engine Intake Pipe Valve Cleaner Walnut Sand Carbon Deposit Cleaning Machine

Description

Car Engine Intake Pipe Valve Cleaner Walnut Sand Carbon Deposit Cleaning Machine
AUTOOL HTS558 is a de-carbon device for intake valve cleaning, whose working principle is to blast the walnut media into the intake valve through high-pressure airflow. The carbon deposits on the valve and cylinder wall impacted down. The walnut media and carbon deposit mixture can be recycled through special joints.
It can deeply remove the sticky carbon deposits on the intake manifold, intake valve and exhaust valve. Effectively solve the problems of unstable idling, insufficient air intake, insufficient power, and insufficient acceleration.
Car De-Carbon Cleaning Experts
Carbon deposits lead to engine idling instability, insufficient air intake,power down, acceleration weakness.
HTS558 helps you clean the carbon deposits effectively,restoring your car to a healthy engine.
Deep Removal of Carbon Deposits
Deeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves.(Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio.)
Built-in Dust Filter
Dust filter can separate the recovered walnut sand grit from carbon deposits for recycling. Walnut powder residual in intake pipe will go into ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts.
External Air Source
This enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.
Integrated Design
The walnut sand grit can be sprayed and recovered simultaneously.
3 Years Warranty
For damage caused by non-human factors, we promise to resend parts for free within 3 years.
How to use:
1) Open the cover of HTS558 machine and pour into walnut powder (need 2-4KG ), then put dust guard on walnut powder and close.
2) Connect blasting gun nozzle and recycling hose together (there is a hole on recycling hose)
3) Remove intake manifold of the engine, plug blasting gun into the intake, and turn the crankshaft to close intake valve. Connect high-pressure air pump((not included)) to HTS558.
4) Connect AC power, then start cleaning. The process should last 1-3 minutes(depending on how much carbon build-up)
5) Close the HTS558, check-up cleaning effect. Normally, the walnut powder can be reused 5-10 times(depending on how much carbon build-up).
Why need to clean carbon deposition:
Carbon deposition will decrease the air-fuel ratio, cut down engine output power, and increase fuel consumption. All of them will damage the engine deeply. Generally, we need to clean the engine carbon after running for 2 years or driving to 4W kilometers. By removing the throttle, a carbon deposit can be seen clearly.
Specification:
Air pump pressure should more than 0.7Mpa (7bar/102PSI)
Walnut powder diameter should between 0.4-0.8mm, amount in 2-4KG(4-9LB)
Cleaning time between 1-3 minutes
Rated Voltage:110V
Rated Frequency:50/60HZ
Rated Power:1200w
Package Size:400 x 400 x540mm
Package Included:
1x AUTOOL HTS558 cleaner
2x Spray gun
1x Goggles
1x Recycle hose
1x Recycle hose and spray gun connector
Walnut powder not include in package,please get it in local market
High pressure air pump is requirement(not include in package)
Payment
Delivery details
Return Policy
About us
Contact us
Payment
1. We accept
PayPal
only.
2. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal.
3. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable.
4. Please make the payment within 3 days.
Delivery details
1. We ship to WORLDWIDE .
2. Item will be shipped out within 1-2 working days (except weekends and holidays) after the payment is cleared or received.
3. We will send item to your Confirmed Shipping Address in Paypal only.Please confirm your order and address before you bid or pay the item.
4.International Buyers Please Note: 1)Please check with your country customs office to determine what these additional costs will be prior to bidding / buying.
2)Import duties
, taxes and charges are the buyer’s responsibility,please understand.
Return Policy
Item may be returned for refund or replacement within 30 days of the purchase date.
Defective products may be returned for repair up to 1 year from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.
Before any return, a Return Merchandise Authorization (RMA) must be obtained by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense. The buyer is responsible for the cost of returning any merchandise.
About us
We are a professional worldwide Professional company.
We are reliable supplier to both wholesalers and retail sellers. We supply many products on Automobile consumer.Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
Contact us
Our normal business hour is Monday to Friday 9:00 AM to 6:00 PM Beijing TIME. Please email me through "MY MESSAGES" on eBay, if you have any questions about our listings or inventory or troubles. All messages be reply within 24 hours. Welcome your any-time parchase!