Car Engine Intake Pipe Valve Clean Machine Auto Walnut Sand Carbon Cleaner 110V

Description

AUTOOL HTS 668 Walnut Sand Decarbonizing Machine is sprayed into the engine intake pipe through high-pressure airflow, and the high-pressure high-speed sand will roll and collide in the closed intake pipe, thereby impacting the carbon deposit on the intake valve and the cylinder wall. Then,the walnut sand and carbon deposit mixture are recycled to the dust bucket through a special joint.
Store category
Sign Up Now !
You may also like
AUTOOL HTS558 Car Engine Intake Pipe Valve Clean Machine Auto Walnut Sand Carbon Cleaner 110V
Product Description
Description:
AUTOOL HTS 668 Walnut Sand Decarbonizing Machine is sprayed into the engine intake pipe through high-pressure airflow, and the high-pressure high-speed sand will roll and collide in the closed intake pipe, thereby impacting the carbon deposit on the intake valve and the cylinder wall. Then,the walnut sand and carbon deposit mixture are recycled to the dust bucket through a special joint.
*What is Carbon deposit?
Carbon deposit is the black gel that caused by the repeated high temperature of the engine running, which is the the residual rubber in the fuel injector, the throttle valve, the oil circuit, the spark plug, the cylinder head, the inner wall and other components caused by insufficient combustion of the gasoline in the cylinder. Generally, vehicles need to be cleaned of engine carbon when running for 2 years or driving to 4W kilometers. By removing the throttle,carbon deposit can be seen clearly.
*Why need to decarbonize?
1.The vehicle starts to power drop, waste fuel, engine noise and idle speed.
2.Difficulty in start, acceleration, engine shake, and excessive exhaust.
3.The carbon hard block falls off, which causes the engine to fail to start, or falls into the combustion chamber, causing the combustion chamber wall to wear, eventually damages the engine.
*What is walnut powder(sand)?
1.Crash walnut shell into powder, after a vigorous selection process then we get walnut sand.It show high performance in the three area: hardness, anti-pressure, wear-resisting.
2.A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive.It was hardly dissolved in acid, alkali and water.
3.Walnut sand is a pure natural polish material, its hardness was lower than metal but higher than carbon deposition,it will clean intake pipe and back side of intake valve thoroughly but no damag.
Feature:
1.
[Deep Removal Of Carbon Deposits]
:Deeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves.（Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio.)
2.
[External Air Source]
:This enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.
3.
[Built-in Dust Filter]
:It can separate the recovered walnut sand grit from carbon deposits for recycling.
4.
[Integrated Design]
:The walnut sand grit can be sprayed and recovered simultaneously.
5.
[3 Years Warranty]
:For damage caused by non-human factors, we promise to resend parts for free within 3 years.
Specification:
Applications:All Vehicle.
Rated Voltage:110V.
Rated Frequency:50HZ/60HZ.
Capacity:13L.
Rated Power:1200W.
Vacuum Suction:0.02 Mpa.
Air Flow:＜300L/Min.
Easy To Operate:
1.Open head cover of AUTOOL HTS558 and pour into walnut powder (need 2 - 4KG ),press dust guard on walnut powder then close cover
2.Join spary gun muzzle and recycle hose together (there is a hole on recycle hose).
3.Remove intake manifold of engine,plug spary gun into intake,turn crankshaft to close intake valve.Connect high pressure air pump((not include)) to HTS558.
4.Connect AC power,start clean.The process should last 1-3 minutes(depending on carbon deposition circumstances).
5.Close AUTOOL HTS558,check up cleaning result.
Recommend:
1.Air pump pressure should more than 0.7Mpa (7bar/102PSI).
2.Walnut powder diameter should between 0.4-0.8mm, amount in 2-4KG(4-9LB).
3.Cleaning time between 1-3 minutes.
NOTE:
1.Walnut powder not include in package,please get it in local market.
2.Normally,walnut powder can be reuse 5-10 times(depending on carbon deposition circumstances).
3.High pressure air pump is requirement(not include in package).
4.Walnut powder residual in intake pipe will go to ashes in high temperature after engine start.
Packing List:
1 PC* AUTOOL HTS558 Unit.
2 Pcs*
Spray Gun.
1 PC*
Goggles.
1 PC*
Recycle Hose.
1 PC*
Recycle Hose And Spray Gun Connector.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
1. We accept PayPal only.
2. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal (You don't need a PayPal account)!
3. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable !
4. Please make the payment within 3 days.
Delivery details
1. Nowadays, you can meet AUTOOL on every continent and in 160 countries around the world.
2. Item will be shipped out within 1-5 working days (except weekends and holidays) after the payment is cleared or received.
3. We will send item to your Confirmed Shipping Address in Paypal only.Please confirm your order and address before you bid or pay the item.
4.International Buyers Please Note:
1) Please check with your country customs office to determine what these additional Import tariffs costs will be prior to bidding / buying.
2) It's the buyer's responsibility to complete clearance when parcel reached your Customs. We are Not responsible for buyers's local taxes, please consult local Customs for Tax Details. Customs rates vary from country to country, please understand.
5. Any further queries, please don't hesitate to email us. Thank you.
Terms of sales
1.Our Service:
From the date of receipt, we provide a
3-YEAR WARRANTY
for the main unit and all the accessories included.
2.Warranty Access:
（1）The repair or replacement of products is determined by the actual breakdown situation of product.
（2）It is guaranteed that AUTOOL will use brand new component, accessory or device in terms of repair or replacement.
（3）If the product fails within 90 days after the customer receives it, the buyer should provide both video and picture.While the product is received for more than 90 days, the customer will bear the appropriate cost and we will provide the parts to the customer for replacement free of charge.
3.These Conditions Below Shall Not Be In Warranty Range:
The product breakdown because the user does not follow product instructions to use or maintain the product.
About us
1.Our Story
:
AUTOOL was founded in 2014 in Shenzhen, China, inspired by a group of vehicle enthusiasts. They have been in the field of car repair tools for more than ten years, dreaming of a simpler and more efficient solution for car repair!
2.Our Products
:
Product development, quality control,and customer service are always highest on our list of priorities. Moreover, we will launch premium new products persistently, with patented technologies and innovative ideas embedded in.
3.Our Vision:
We are always responsible for our products, responsible for our customers and responsible for our partners. We aspire to be an outstanding and competitive supplier of automotive tools, providing the customers with affordable and high-quality products.
Contact us
1. If you have any further queries, you can feel free to email me via email or eBay message. Thank you.
2.
Please email us first before giving negative feedback or opening a case.
Wish we can solve the problem peacefully.
3. Much appreciated if you could leave us positive feedback with five stars.
4. We will reply you within 12 hours and do our best solve the problem with you （Except on Weekends and Holidays）.
5. Work Time:
Monday to Friday GMT8 (9:00am-18:00 PM)
.
Feedback