220V Engine Intake Pipe Valve Carbon Deposition Clean Machine Walnut Powder Sand

Description

Store category
Sign Up Now !
You may also like
AUTOOL HTS558 220V Auto Engine Intake Pipe Valve Clean Machine Valvetronic System Walnut Powder Sand Carbon Deposition Cleaner.
Product Description
Please Click On the Video to Quickly Learn About AUTOOL HTS558
☝
Description:
AUTOOL HTS558 walnut powder engine Intake pipe valve clean machine is a advanced equipment for clean engine intake carbon deposition. Keeping engine in healthy status, make sure engine provide high quality power constantly.
AUTOOL HTS558 is specail for intake pipe and intake valve back side clean only, if you want to clean carbon deposition on injector/throttle valve/cylinder, please choose AUTOOL CT150,AUTOOL CT200 or AUTOOL C100. Walnut powder not include in package,please get it in local market; High pressure air pump is requirement(not include in package); Walnut powder residual in intake pipe will go to ashes in high temperature after engine start.
Carbon deposition & walnut powder sand
What is carbon deposition?
There are some hydrocarbon olefin residues attach on engine intake,cylinder when fuel burn in engine not completely. These residues change into hard black shell in high temperature condition , that called carbon deposition.
Why need clean carbon deposition?
Carbon deposition will decrease air-fuel ratio, cut down engine output power, increase fuel consumption, engine drastic shake on idle status...all the thing will hurt engine deeply. So normally we should clean carbon deposition after every 40000-50000 kilometer trip.What is carbon deposition?
There are some hydrocarbon olefin residues attach on engine intake,cylinder when fuel burn in engine not completely. These residues change into hard black shell in high temperature condition , that called carbon deposition.
What is walnut powder(sand)?
Crash walnut shell into powder, after a vigorous selection process then we get walnut sand. It show high performance in the three area: hardness, anti-pressure, wear-resisting. A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive.
It was hardly dissolved in acid, alkali and water.
Walnut sand is a pure natural polish material, its hardness was lower than metal but higher than carbon deposition, it will clean intake pipe and back side of intake valve thoroughly but no damage
Recommend:
1 Air pump pressure should more than 0.7Mpa (7bar/102PSI)
2 Walnut powder diameter should between 0.4-0.8mm, amount in 2-4KG(4-9LB)
3 Cleaning time between 1-3 minutes
Feature:
AUTOOL HTS558 is a special machine for engine Intake pipe and intake valve back side clean. Close intake valve, then spray walnut powder into engine intake via air pump(not include), meanwhile HTS558 will recycle walnut powder by vacuum. This is a closed loop. Walnut powder will impact carbon deposition on inner wall of intake pipe. After thousands of impact, carbon deposition will be clear thoroughly
Chemical cleaning agent will corrodes pipe and shortens the lifetime of engine.
Walnut powder is pure natural polish material. It show high performance in hardness, anti-pressure and wear-resisting. Walnut powder hardness was lower than metal but higher than carbon deposition. Take these advatages, AUTOOL HTS558 will clean clean intake pipe and back side of intake valve thoroughly but no damage
High-precision engine system is sensitive to foreign matter of intake pipe, such as BMW valvetronic system. That is why we need AUTOOL HTS558 to clean carbon deposition in intake pipe. Engine should be closed before clean, then turn crankshaft to close intake valve. AUTOOL HTS558 clean one intake pipe
each time, 6 cylinder engine should cleaned 6 times one by one(and so on)
How to use?
1) Open head cover of AUTOOL HTS558 and pour into walnut powder (need 2- 4KG ), press dust guard on walnut powder then close cover
2) Join spary gun muzzle and recycle hose together (there is a hole on recycle hose)
3) Remove intake manifold of engine, plug spary gun into intake, turn crankshaft to close intake valve. Connect high pressure air pump((not include)) to HTS558
4) Connect AC power, start clean. The process should last 1-3 minutes(depending on carbon deposition circumstances)
5) Close AUTOOL HTS558, check up cleaning result. Normally, walnut powder can be reuse 5-10 times(depending on carbon deposition circumstances)
Specification：
Applications：All vehicle
Rated voltage：220V（
if
Need 110V, please contact to buy
）
Rated frequency：50/60HZ
Capacity：13L
Rated power：1200W
Vacuum suction：0.02MPa
Air flow：<300L _/Min
Package dimensions：400x400x540mm
Weight：10KG
Package include:
1x AUTOOL HTS558 unit
2x Spray gun
1x Goggles
1x Recycle hose
1x Recycle hose and spray gun connector
5
x Silicone adapter
Payment
Delivery details
Return Request
Tax
Feedback
Payment
1. We accept PayPal only.
2. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal (You don't need a PayPal account)!
3. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable !
4. Please make the payment within 3 days.
Delivery details
1.We'll send package to you within 3 business days after getting your payment.
2.Tracking number will be added on eBay order once item be shipped .
3.Usually we ship the package via: Fedex,UPS/USPS, DHL EMS,Aramex,SpeedPak,China Post, DHL eCommerce,AU POST and Hongkong POST etc.
4.If you have special demand for shipping service,Pls keep us inform before paying ,or leave message when paying,then we will give you a solution ASAP.
Return Request
1.Packages accepted to be returned for refund or replacement within 30 days of the purchase date.
2.
Returned merchandise must be unused, in original packaging and include all accessories.
3.Shipping costs are non-refundable.
4.Defective products may be returned for repair up to 3 year from the purchase date
.
5.Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.
Tax
1
.Import duties, taxes and customs duties are not included in the item price or shipping charges.
2.Any tax fees or customs duties occurred in import country ,that should be covered by buyer. Thanks for your understanding.
3
.
Please check with your country customs office to determine what these additional costs will be prior to bidding / buyin
g
.
Feedback
1.Welcome to our store,wish you have happy shopping time!
2.
We maintain high standards of excellence and strive for 100% customer satisfaction!
Feedback is the best support for our store.
3.
Do wish you can contact us firstly BEFO
RE giving us
or
feedback, so that we can know the problem and try our best to meet your requirements.Thank you~
4.Any question ,Pls feel free to contact us via eBay message, we will reply within 24 hours (except weekends and holidays).
5. Working time: 9:00 AM to 6:00 PM (GMT +8) of Monday to Friday.
6.
We apologize for the late reply during the holidays.